Wieland Wienet FS 16-EI-W User Manual Download Page 105

Page: 105 / 108

5 Managing Switch

Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018

105

The following table describes the items in the previous figure.

Item

Description

Upgrade Method Click the drop-down menu to select the upgrade method: TFTP or HTTP.

Server IP

Enter the IP address of the upgrade server.

File Name

Enter the file name of the new firmware version.

Upgrade Type

Click a type to define the upgrade method: image, startup configuration, or running
configuration.

Image

Click the format for the image type: 7710E_2C_1_00_13.bix (Active) or vmlinux.bix
(backup).

Upgrad

Click Upgrade to upgrade to the current version.

5.13.4

Dual Image

The Dual Image page allows you to setup an active and backup partitions for firmware image redundancy.

To access this page, click Tools > Dual Image.

Figure 5.93 Tools > Dual Image

The following table describes the items in the previous figure.

Item

Description

Active Image

Click the format for the image type: Partition0 (Active) or Partition1 (backup).

Save

Click Save to save and keep the new settings.

The ensuing table for Image Information 0/1 settings are informational only: Flash Partition, Image Name,
Image Size and Created Time.

5.13.5

Save Configuration

To access this page, click Tools > Save Configuration.

Click Save Configuration to FLASH to have configuration changes you have made to be saved across a
system reboot. All changes submitted since the previous save or system reboot will be retained by the
Switch.

5.13.6

User Account

The User Account page allows you to setup a user and the related parameters.

To access this page, click Tools > User Account.

Summary of Contents for Wienet FS 16-EI-W













































































































Search results

Summary of Contents for Wienet FS 16-EI-W

Reviews:

Related manuals for Wienet FS 16-EI-W

Brands by name

Popular brands

Wieland Wienet FS 16-EI-W, User Manual

Search results

Summary of Contents for Wienet FS 16-EI-W

Reviews:

Related manuals for Wienet FS 16-EI-W

Brands by name

Popular brands