Wieland Wienet FS 16-EI-W, User Manual

Page: 101 / 108

5 Managing Switch
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018 101
Figure 5.87 Diagnostics > System Log > System Log Server
The following table describes the items in the previous figure.
Item Description
Server Address Enter the IP address of the log server.
Server Port Enter the Udp port number of the log server.
Severity Click the drop-down menu to select the severity level for local log messages. The
level options are:

emerg: Indicates system is unusable. It is the highest level of severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages
Facility Click the drop-down menu to select facility to which the message refers.
Apply Click Apply to save the values and update the screen.
The ensuing table for Remote Logging Setting Status settings are informational only: Status, Server Info,
Severity, Facility and Delete (click to delete the desired server address).
5.12.5 DDM
The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
Figure 5.88 Diagnostics > DDM
The following table describes the items in the previous figure.