Configuration of gateways with samosPLAN
6
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
49
If you also want to change the tag names of individual bits:
Overwrite the pre-allocated values with the desired new value under
Parameters
in the confi-
guration dialog.
In the
Logic
view, these bits will appear with the corresponding tag names.
Editing the gateway input values (tab 2)
80913931
You can use the following settings for the output values of a gateway in tab 2:
Basic setting
Depending on the gateway function selected, you will find four or eight bytes in tab 2, which are re-
served as direct gateway input values. You can also see these bytes in the
Logic
docking window.
Example: SP-CANopen module with four predefined inputs for gateways:
"Logic” docking window
"Gateway" view
In the
Logic
docking window you
see these four bytes under
Inputs
:
In the
Gateway
view, these four inputs appear in tab 2:
Change tag names of a predefined input value
Tag names have already been pre-assigned to the predefined input values (bytes). You can change
these tag names:
In the
Gateway
view click on the byte, whose tag name you want to change.
5.4
