Configuration of gateways with samosPLAN
6
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
47
Modbus TCP
PROFIBUS DP
Byte
Preset allocation
Initial data set Preset allocation
Initial data
block
35
Outputs for Module 12
Outputs for Module 12
36-47
Not allocated
Continued
#1
(50 bytes)
Not allocated
#4
(12 bytes)
48-49
Not allocated
Not allocated
#5
(2 bytes)
The preset allocation of the bytes can be freely configured, as shown in the following section.
Configuring the gateway output values (tab 1)
80889739
You can use the following settings for the output values of a gateway in tab 1:
Basic setting
Depending on the gateway function selected, you will find four or eight bytes in tab 1, which are re-
served as direct gateway output values. You can also see these bytes in the
Logic
docking window.
Example: SP-CANopen module with eight predefined outputs for gateways:
"Logic” docking window
"Gateway" view
In the
Logic
docking window you
see these four bytes
Outputs
:
In the
Gateway
view these four outputs appear in the first
tab:
Change tag names of a predefined output value
Tag names have already been pre-assigned to the predefined output values (bytes). You can change
these tag names:
In the
Gateway
view click on the byte, whose tag name you want to change.
5.3
