Appendix
Wieland Electric GmbH | BA000966 | 08/2017 [8151]
106
Checklist for manufacturers
888586251
The information in the following points must be available at least during first-time commission-
ing. It may vary depending on the application and the requirements from the manufactu-
rer/supplier must be checked.
This checklist should be retained or stored with the machine documents so that it can be used
as a reference during recurring tests.
NOTICE
This checklist is not a replacement for the first-time commissioning or the regular testing
done by a qualified person.
Table 61: Checklist for first-time commissioning
Question
Yes
No
Were the safety guidelines according to the directives/standards valid
for the machine used as a basis?
Yes
o No
o
Are the directives and standards used listed in the Declaration of Con-
formity?
Yes
o No
o
Does the safety equipment correspond to the required category?
Yes
o No
o
Are the required protective measures against electric shock effective
(protection class)?
Yes
o No
o
Has the protective function been checked in accordance with the
testing information in this documentation? In particular:
• Functional check of the command devices, sensors, and actuators
connected to the safety control
• Test of all switch-off paths
Yes
o No
o
Have you ensured that a complete test of the safety functions has
been carried out after every configuration change to the safety con-
trol?
Yes
o No
o
14.2
Summary of Contents for samos PRO COMPACT
Page 1: ...samos PRO samos PRO COMPACT Hardware Manual Doc no BA000966 Last Update 08 2017 8151...
Page 103: ...Appendix Wieland Electric GmbH BA000966 08 2017 8151 103 Declaration of Conformity Page 2...
Page 104: ...Appendix Wieland Electric GmbH BA000966 08 2017 8151 104 Declaration of Conformity Page 3...
Page 105: ...Appendix Wieland Electric GmbH BA000966 08 2017 8151 105 Declaration of Conformity Page 4...
