Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 51 / 60

0.3
Wieland Electric | BA000341 | 02.2007
10 | Appendix
AC input
• Input voltage V
supply
230/400 VAC
• Supply frequency input 50 Hz ± 10 % (45 Hz ... 55 Hz)
AC output
• Output voltage V
supply
(input voltage)
• Output current per phase max. 16 A (observe line fusing!)
• Output frequency 50 Hz ± 10 % (45 Hz ... 55 Hz)
AS interface
• AS-i specification V2.11, single slave, 1E/4AIdentifier ID: F, ID1:
F, ID2: E, I/O: AID1 changeable via addressing
device
• Number of addressable slaves 31
• Connection type Tapped from podis
®
flat cable
• Induced current consumption approx. 15 mA
• AS-i voltage min. 26.5 V
• Current consumption from AS-i max. 200 mA overload-safe
• Addressing option DC socket 1.3 mm
Digital inputs
• Digital inputs (via AS-i) 1 (M ok)
• Input current typ. 5 mA
• Signal level V
high
/ V
low
+15 V ...+31.5 V / -3 V ...+5 V
• Signal delay typ. 1 ms
Digital outputs
• Outputs to the motor (supply via AS-i) 4
• Output voltage approx. V - 0.5 V
• Total current of outputs max. 180 mA short-circuit-proof/overload-safe
• Signal delay typ. 1 ms
• Coincidence 100 %
General data
• Environmental conditions (overall system) Industrial atmosphere
• Pollution degree III
• Overvoltage category 3
• Fire behavior of contact carriers min. UL94V2
• Temperature - operating environment 0...50 °C
• Temperature - storage/transport -25 °C...60 °C / -25 °C...+70 °C
• Vibration IEC 60721 Class 3M6
• Air humidity 100 %, non-condensing
• Enclosure IP 65 acc. to EN 60529
• Protection class Class 1 acc. to 60536
• Mounting position any (preferably horizontal wall mounting)
• Dimensions W x H x L ca. 60 x 79.5 x 6.30 in
Technical data
83.9.xx0.