Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 43 / 60

8.
Wieland Electric | BA000341 | 02.2007
8 | Operation
8 Operation
8. Functional check
Check whether the device and the control function properly. The operating state is indicated by
the status LEDs as follows:
Color Designation Status Meaning
green AS-i power constantly on AS-i voltage supply is correct
off AS-i supply is missing
red AS-i fault constantly on Communication error at AS interface, slave does not
participate in normal data traffic (e.g. slave address
"0")
flashing Periphery error, e.g. short circuit of AS-i voltage
off AS-i communication is correct
yellow IN 0 constantly on Signal voltage IN0 high level
off Signal voltage IN0 low level
yellow IN 1 constantly on Signal voltage IN1 high level
off Signal voltage IN1 low level
yellow IN 2 constantly on Signal voltage IN21 high level
off Signal voltage IN2 low level
yellow M ok constantly on Drive operational
off Drive not operational, no supply connected
yellow M op constantly on Motor electronics on
off
yellow M fwd constantly on Motor turns CW
off Motor does not turn CW
yellow M rev constantly on Motor turns CCW
off Motor does not turn CCW
yellow f1/f2 constantly on Speed f2
off Speed f1
Operating state
83.0.xxyy.z