Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 38 / 60

6.4
Wieland Electric | BA000341 | 02.2007
Electrical Installation | 6
5. Screw in the penetrating screws.
• Screw all penetrating screws into the flat cable.
• Torque: 1 Nm
Conductor assignment
0/
9
1 L1
L1
2 L2 L2
3 L3 L3
4 N N
5 + AS-i +
6 - AS-i -
PE PE PE
6. If disconnected: Reinsert the electrical plug connections between hood and base.
7. Fasten the hood with the four fastening screws.
• Ensure that the unit is tight and that no connecting cables have been pinched.
• The podis field distributor is connected to the energy bus.
6. Connection to the AS interface
Connect the AS-i interface of the podis field distributors 83.210.xxyy.z and 83.212.xx01.2 to the
AS-i network using the yellow AS-i cable.
It is recommended to establish the connection via the AS-i connecting clip and AS-i tap line.
Both parts are available as accessories from Wieland Electric GmbH (see appendix for ordering
information).
AS-i connection
NOTICE
Assignment of
contact points
Screwing in penetrating screws
Philips #1 screwdriver
with at least 45 mm shaft length