Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 23 / 60

3.3
Wieland Electric | BA000341 | 02.2007
3 | podis
®
MOT FA C IO/I3O Device Description
AS-i connection (M) X (view from outside onto plug contacts)
Pin Brief description Note
1 AS-i + AS int
3 AS-i - AS interface -
The podis MOT can be addressed using a hand-held terminal. For this purpose, the AS-i hand-
held programming device (part no. 83.209.2205.0) is connected to the addressing jack of the
podis MOT. Additional information about addressing can be found in section 7.1. "Setting the
AS-i slave address at the podisMOT".
Digital inputs X4, X5 (view from outside onto socket contacts)
� �
� �
�
Pin Brief description Note
1 24 V 24 V sensor supply(*)
2 IN Switched input
3 0 V 0 V of sensor supply(*)
4 IN Switched input
5 Ground Equipotential bonding
(*) The digital inputs at X4 and X5 are supplied from AS-i (internal).
Digital outputs X3 (view from outside onto socket contacts)
� �
�
�
�
Pin Brief description Note
1 NC NC
2 NC NC
3 0 V 0 V of supply(*)
4 OUT Switched output
5 Ground Equipotential bonding
(*) The digital outputs at X3 are supplied from the podis flat cable.
����������
����������
����
����
����
�����
�����
�����
�����
No. Color Designation Meaning I/O bit
1 green AS-i power AS-i power ok
2 red AS-i fault Fault of AS-i
4 yellow IN 1 Input M12 E1
5 yellow IN 2 Input M12 E2
6 yellow M ok Motor is operational E3
7 yellow OUT 0 Output M12 A0
8 yellow M Run CW rotation of motor A1
9 yellow OUT 2 A2
10 yellow OUT 3 A3
The status LEDs on the housing cover provide information about the status of the field distribu-
tor. See also section 7.1, "Fault removal".
Connection
assignment of
AS-i socket
Connection
assignment of
digitalinputs
Connection
assignment of
digitaloutputs
Status LEDs