Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 22 / 60

3.
Wieland Electric | BA000341 | 02.2007
podis
®
MOT FA C IO/I3O Device Description | 3
3. Mechanical design / housing
Based on its mechanical design, the housing of the podis MOT FA C 2I/1O/1I3O is divided into
an upper and a lower part.
The upper housing part contains the electronics for the control of the drive and for the I / Os.
The upper part is fastened onto the lower part using four screws.
The base contains the connection technology for the podis energy bus.
The electrical connection between hood and base is implemented via a cable harness from
the base connected to a PCB pluggable connector in the hood.
3.3 Connections, control and display elements
6
1
5
2
4
3
Connections at the podis
®
MOT
1 ADDR Connection of the AS-i hand-held terminal
2 AS-i (X2) Connection of the AS-i tap line
3 OUT0 (X3) Digital M12 output to connect an actuator
4 IN1 (X4)
Digital M12 input to connect a sensor
5 IN2 (X5) Digital M12 input to connect a sensor
6 X1 Interface to the drive
Connections at
the podis
®
MOT
FA C IO/I3O
Hood with integrated
electronics
Pluggable connection
between hood and base
Base with connection technology
(hidden by cover plate)
podis
®
MOT
FA C IO/I3O
(geöffnet)