Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 14 / 60

.4
Wieland Electric | BA000341 | 02.2007
podis
®
MOT FA C/CM/CP 3I/I4O Device Description | 2
AS-i connection (M) X (view from outside onto plug contacts)
Pin Brief description Note
1 AS-i + AS int
3 AS-i - AS interface -
The podis MOT can be addressed using a hand-held terminal. For this purpose, the AS-i hand-
held programming device (part no. 83.209.2205.0) is connected to the addressing jack of the
podis MOT. Additional information about addressing can be found in section 7.1. "Setting the
AS-i slave address at the podis MOT".
Digital inputs X3, X4, X5 (view from outside onto socket contacts)
� �
� �
�
Pin Brief description Note
1 24 V 24 V sensor supply (*)
2 IN Digital inputs
3 0 V 0 V of sensor supply (*)
4 IN Pin 4 connected with pin 2
5 Ground Equipotential bonding
(*) The digital inputs at X3, X4 and X5 are supplied from AS-i (internal).
revos MOT connector
Pin Designation Meaning
1 L1 Motor lead voltage U
2 L2 Motor lead voltage V
3 L3 Motor lead voltage W
4 0 V 0 V of external voltage(*)
5 +24 V 24 VDC of external voltage(*)
6 OUT 0 Supply for motor electronics
7 OUT 1 Motor control lead CW rotation
8 OUT 2 Motor control lead CCW rotation
9 OUT 3 Speed switching f1 / f2
10 IN 3 Ready message from motor
PE PE PE connection
(*) The supply is provided by an external 24- V power supply.
Connection
assignment of
AS-i socket
Connection
assignment of
digital inputs
Connection
assignment of
connector at FA
CP 3I/I4O