Wieland podis?MOT FA C 1I3O, Operating Instructions Manual, Page: 11 / 60

.
Wieland Electric | BA000341 | 02.2007
2 | podis
®
MOT FA C/CM/CP 3I/I4O Device Description
Device Description
podis
®
MOT FA C 3I/I4O / FA CM 3I/I4O / FA CP 3I/I4O
. Variant overview
podis MOT FA C 3I/1I4O
83.210.xxyy.2 podis MOT FA CM 3I/1I4O
83.210.xxy1.4 podis MOT FA CP 3I/1I4O
83.210.0005.2
revosBASIC connector
interface for connecting the
field devicesPreassembled
standard PVC cable 11G1,5
to the consumer (drive)
same as podis MOT FA C
3I/1I4O, but with repair
switch
revosMOT connector inter-
face directly at podis ® field
distributor
. General
The field distributors podis MOT FA C 3I/1I4O, podis MOT FA CM 3I/1I4O, and podis MOT FA CP
3I/1I4O are AS-i actuator modules with four control outputs for the control and energy supply of
decentral drives with binary interface.
An entry is available for feedback from the decentral field device.
Using prefabricated M12 connecting lines allows for connecting 2-wire and 3-wire sensors to
the three free inputs. The sensors are supplied in the podis field distributor from the AS interface.
The field distributor is directly connected to the AS-i hand-held terminal (83.209.2204.0) and
addressed using the AS-i programming cable (83.209.2205.0).
To display the current switching state and the status of the inputs, each channel features an
LED in the housing cover of the field distributor.
The connection to the AS-i transmission line is carried out via M12 connecting plug. If a separate
AS-i flat cable is used, the AS-i tap line and the AS-i adapter are required.
The contact to the energy bus is established via penetrating screws.
The repair switch at the podis MOT FA CM 3I/1I4O disconnects the power supply (L1, L2 and L3)
from the drive. A feedback of the switch setting to the AS-i does not take place.
The repair switch can be secured against unauthorized switch-on using up to three locks.