Configuration and setup
Wieland Electric GmbH | BA000870 | 06/2020 (Rev. A)
29
5.8.3
System log
This page displays the current event log or system log stored in the
wienet SDS
. Figure 25 shows an
example of a logged event. The first two lines are
Severity option
and
Modules option
. You can
choose to display the category of the
Severity
which can be
ALL
,
Err
(Error),
Warn
(Waring) or
Info
(Information). Additionally, you can check the
All
box behind the
Modules
option to display log of all
modules. Each record of the
System Log
consists of
Time
,
Severity
, and
Message
description.
Figure 25: System Log web page under System Setup
At the end of the
System Log
page, there are three hyperlinks which can be used to navigate
through all records. You can click on the
Previous
link to go to the previous page of the log and click
on the
Next
button to go to the next page. At the top of the
System Log
table, there are three but-
tons:
Refresh
,
Export Log
, and
Clear Log
. To display the latest event, you can click on
Refresh
but-
ton. When you click on the
Export System Log
button, a log file will be saved on to your PC. By click-
ing on "Clear System Log" button, you can clear all events stored in the device and the
System Log
will be empty. A message
No data available in table
will be displayed in the middle of the table.
Moreover, you can choose from the drop-down list of 10 or 25 entries for the
Show entries
. Finally,
you can search over the
System Log
by entering a keyword in the
Search
box.