Wieland 83.040.0500.0, Manual, Page: 10 / 42

Getting started
Wieland Electric GmbH | BA000870 | 06/2020 (Rev. A)
10
4.4 Factory default settings
4.4.1 Network default settings
The
wienet SDS
is equipped with one LAN interface with one default IP address. The default network
parameters are listed in Table 2.
Table 2: Network default setting
Interface
Device IP Subnet Mask Gateway IP DNS
LAN1 10.0.50.100 255.255.0.0 10.0.0.254 0.0.0.0
4.4.2 Other default settings
The
wienet SDS
comes with the following default settings.
Table 3: Security, Serial, and SNMP default settings
Parameter
Default Values
Security
User Name admin
Password wienet123
Serial
COM1 RS-232, 9600 bps, 8 data bits, No Parity bit,1 stop bit, No Flow Control
Packet Delimiter timer: Auto
SNMP
SysName of SNMP System
SysLocation of SNMP Location
SysContact of SNMP Contact
SNMP Disabled
Read Community Public
Write Community Private
SNMP Trap Server 0.0.0.0
Press the "Reset" button (inside a small hole) on the back panel between terminal block power in-
put and LAN port for 5 seconds or follow the procedure in section 5.9.4 Backup/restore configura-
tion, p. 33, to restore the wienet Industrial Serial Device Server to the factory default settings.
NOTI C E