Flex Cut RMR 230 H
2 To this document
05 | 2021
846 99 01
–
003
9
2.5.4
Figures
The figures in this document do not always represent the exact machine type. The information with reference to the figures
always corresponds to the machine type in this document.
2.5.5
Scope of the document
Alongside the standard equipment, optional equipment is also described in this document. Your specific machine may differ
from this.
2.5.6
Means of presentation
Symbols in Text
The following means (symbols) are used to present the text with a clear structure.
➢
This arrow represents an
action step
. Multiple arrows in succession represent a sequence of actions that is to be
performed one step at a time.
✓
This symbol represents a
prerequisite
that must be met in order to perform an action step or sequence of actions.
This arrow represents the
interim result
of an action step.
The tick represents the result of an action step or sequence of actions.
•
The dot represents a list. If the dot is indented, it represents a further level of the list.
Symbols in pictures
The following symbols can be used in figures:
Symbol Explanation
Symbol
Explanation
Reference sign for component
Position of a component
Position numbers in pictures
Digits in round brackets refer to item numbers in figures.
Warnings
Warnings regarding hazards are offset from the rest of the text as warning signs and also include both a danger symbol and
signal words.
To avoid personal injury and material damage, it is important to observe the warning signs and their measures!
