Wiedenmann Flex Cut RMR 230 H Translation Of Original Operating Instructions Download Page 42

Page: 42 / 55

Flex Cut RMR 230 H

10 Maintenance

846 99 01 - 003

05 | 2021

10.3.3

Belt idler lever

Every 250 hours:

➢

Detach all protection cap on the right side.

➢

Lubricate the lubrication nipple (

) on the tensioning

roller lever.

10.3.4

Tensioning roller

➢

Remove protective covering on both sides.

➢

Lubricate the lubrication nipple (

) on the tensioning

rollers.

10.3.5

Support wheels

Every 50 hours:

➢

Lubricate the lubricating nipple (

) on the support

wheel bearings.

10.4

Lifting out the mower (placing in an upright position)

GEFAHR!

Risk of accident due to improper maintenance

➢

The mower can be lifted out (placed in an upright position) for maintenance, repair and cleaning
purposes only.

➢

Lower the lawn mower to the ground.

➢

Remove the cardan shaft.

➢

Release the upper guide bar on the lawn mower.

Summary of Contents for Flex Cut RMR 230 H
























































Search results

Summary of Contents for Flex Cut RMR 230 H

Reviews:

Related manuals for Flex Cut RMR 230 H

Brands by name

Popular brands

Wiedenmann Flex Cut RMR 230 H, Translation Of Original Operating Instructions

Search results

Summary of Contents for Flex Cut RMR 230 H

Reviews:

Related manuals for Flex Cut RMR 230 H

Brands by name

Popular brands