Flex Cut RMR 230 H
11 Disposal
50
846 99 01 - 003
05 | 2021
➢
Turn the lawn mower.
➢
Hold the mowing blade fast using a glove or a soft
object (wood), so that it cannot rotate.
➢
Release the screw (
1
).
➢
Remove the plate washer (
2
).
➢
Check the blades (
3
), and, if required,
resharpen/balance or replace them. For this end the
fitting position must be observed!
➢
Mount on the plate washer (
2
) and lock it into place.
➢
Tighten screw (
1
) to 125 Nm.
10.8
Unauthorized conversion and spare part
manufacture
•
Only convert or change the machine with the express permission of the manufacturer!
•
The use of original parts and accessories authorized by the manufacturer is in the interest of your safety. Using parts
not released by the manufacturer can have a negative impact on the properties of the machine. In this case, the
manufacturer will assume no responsibility for the resulting consequences.
11
Disposal
11.1
Disassembly/disposal
ATTENTION!
Incorrect disassembly of machine parts!
➢
Please refer to the chapter "Safety measures" and local safety regulations!
➢
The following hazards are:
•
heavy parts that could fall after disassembly
•
sharp edges
•
crushing if machine topples
➢
Place the machine on firm ground.
➢
Drain the hydraulic oil and collect it in a suitable vessel.
➢
Disassemble the machine from top to bottom.
ATTENTION!
Incorrect disposal of environmentally hazardous substances!
➢
Regulations and laws concerning the disposal of hazardous substances and pollutants must be
observed in all cases!
➢
Familiarize yourself completely with the procedure for disposal!
