Flex Cut RMR 230 H
7 Before initial operation
05 | 2021
846 99 01
–
003
35
7
Before initial operation
7.1
General information before startup
➢
Check whether all connection parts necessary for complete delivery are there.
➢
Observe the technical data when connecting to other tractor types.
➢
Compare the revolution speed and direction of rotation (sticker on the machine) to the specifications of your
tractor.
The sticker states which revolution speed and direction of rotation the machine is set to.
➢
Lubricate the cardan shaft (see cardan shaft operating instructions)
➢
Observe the warning and information signs on the machine!
➢
Lift the mower deck with the control valve lever.
7.2
Settings on the machine
7.2.1
Adjustment of cutting height
DANGER!
Danger due to rotating p.t.o. shaft!
➢
Only adjust the cutting height when the
P.T.O shaft is switched off!
➢
Adjust the cutting height by setting the support wheels
higher or lower on a even surface.
➢
Select the corresponding spacer rings to fit the support
wheels to the wheel holders on the mower housing and
secure with a linchpin.
Spacer rings
Cutting hight [mm]
without
30,5 mm
1 x B
35
2 x B
39,5
3 x B
44
4 x B
48,5
1 x A
50
5 x B
53
1 x A + 1 x B
54,5
