Flex Cut RMR 230 H
3 Safety notes
18
846 99 01 - 003
05 | 2021
3.6.11
Road safety
Dangers when driving on the road
If the machine exceeds the maximum dimensions and weights
stipulated by national legislation and is not properly illuminated
as per the regulations, you will put other road users at risk when
driving on public roads.
➢
Always observe local road traffic regulations when using
public roads.
➢
Prior to any road travel, ensure that the maximum
permitted dimensions, as well as the weight, axle,
support and trailer loads are not exceeded.
Observe all guidelines pursuant to national law when
driving on public roads.
➢
Prior to any road travel, switch on the lighting and
ensure that it is working properly (in line with the
regulations).
➢
Prior to any road travel, close all shut-off valves of the
machine's hydraulic system between the tractor and
machine.
➢
Prior to any road travel, move the tractor's control units
to their neutral position and lock them in place.
3.6.12
Risk of tipping over on slopes
WARNING!
Impairment of the machines driving characteristics!
➢
Always adapt your driving style to the respective ground conditions!
➢
Exercise extra caution when working and turning on a slope!
➢
Pay attention to any unevenness on the terrain (bumps)!
3.6.13
Shutting down the machine securely
A machine that has been improperly shut down can start to move in an uncontrolled manner. This can then lead to a risk of
serious or even fatal injuries.
➢
Always shut down and park the machine on stable, horizontal and level ground.
➢
Secure the machine with a support rod.
➢
Prevent the machine from rolling away by placing a chock under the wheel.
➢
Prior to performing any servicing, maintenance or cleaning work, first make sure that the machine is on secure
ground and is stable.
Unattended parking of the machine
An inadequately secured and unattended machine can present a danger to persons, particularly to children.
➢
Before parking, shut down and secure the machine, see Section 3.7.1 "Shutting down and securing the machine".
