BlueGate 2100
Troubleshooting
July 26, 2001
WIDCOMM, Inc, Proprietary and Confidential
36
9.13 C
ANNOT
D
ISCOVER
S
ERVICES
Verify that the client device supports the LAN Access Profile (LAP).
Verify that the client is not configured to screen out the “LAN Access” class of
Bluetooth devices.
9.14 C
ANNOT
C
ONNECT TO THE
LAN A
CCESS
P
ROFILE
S
ERVICE
Device Inquiry and Service Discovery succeed but the connection fails.
•
Verify the security settings of BlueGate 2100 and the client device. The
authentication, authorization, and encryption settings of BlueGate 2100 and the
client must be the same; if BlueGate 2100 has one of more of these options
turned ON and the client has the same setting(s) turned OFF the connection
will fail.
•
The fixed PIN code of BlueGate 2100 and the client must be the same; if the PIN
codes do not match the connection will fail. Since fixed PIN codes are configured
on both sides, there may never be a dialog box displayed to inform you that an
authentication was performed.
•
Verify that the client is not configured to screen out the “LAN Access” class of
Bluetooth devices.
•
Verify that the Bluetooth client device is Bluetooth Specification 1.1 compliant.
Bluetooth client devices that are not 1.1 compliant may not work with
BlueGate 2100, which
is
Bluetooth Specification 1.1 compliant.
9.15 C
AN
’
T
E
STABLISH MORE THAN ONE
LAP
CONNECTION
•
Verify that the Point-to-Multipoint option is enabled for BlueGate 2100.
•
Verify that the client device supports Master/Slave switching. If it doesn’t,
BlueGate 2100 will not be able to make additional connections.