E F
D
H
2
PG :1 / 1
QTY
HARDWARE LIST
NO
QTY
PART LIST
NO
ASSEMBLY INSTRUCTION
BACK REST
SIDE PANEL
1pc
2pcs
1
2
B
1pc
C
1pc
3
A
L - KEY
1pc
D
M4 x 65mm
L - KEY
M5 x 65mm
JCBB SCREW
8pcs
M8 x 20mm
SCREW
12pcs
M4 x 32mm
JCBC SCREW
4pcs
M6 x 60mm
SPRING WASHER
FLAT WASHER
4pcs
4pcs
1/4" x Ø12mm
1/4" x Ø19mm
E
F
G
SR FRONT RAIL
1pc
4
SR BACK RAIL
2pcs
5
SLAT
7pcs
4pcs
6
LEG
WA 5011 DAYBED
ITEM :
B G
3
4
A
5
A
6
STEP 4,
STEP 1,
STEP 2,
STEP 3,
Tighten all bolts from STEP 2 using the Allen Wrench (G) that has been provided. Now only tighten bolts for
STEP 3 using Allen Wrench (H). Attach Slat (5) to Front Rail (3) and Back Rail (4) by unrolling and securing
with 4 Wood Screws (A) 2 per each side.Tighten all screws using philips head screwdriver (not included)
Your new day bed is now complete
Attach the Back Rest (2) to the back of each HB&FB (1) by aligning the hole and securing with 2 Allen Bolt (C), 2 Spring Washer (E), 2 Flat Washer (F) from the back side
per each end. (DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Begin assembly by attaching each Leg (6) to the bottom of the HB&FB (1)
securing with 2 Screws (A) per panel.
Attach the Front Rail (3) and Back Rail (4) to the HB&FB (1) aligning holes and
securing with 2 Allen Bolts (B) per each end.
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
AFTER A FEW DAYS OF ASSEMBLY, IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT. PLEASE TIGHTEN ALL HARDWARE.
NOTE:
CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
