background image

1306AFGAC & 1306AFCAF

McKenzie Full Storage Bed

  Unload items before you move this unit.

Production Code:

 

05/10

VN

Model #

Assembly Instructions

P.O. Box 2827

Eugene, OR 97402 USA

.

Before you begin your project, completely read the 

Assembly Instructions.

.

  Store this item: 1- in its box; 2- in a dry place; 3- in 

temperatures that range from 40°F to 90°F (not on a 

cold and possibly damp cement floor).

  Periodically inspect your furniture for any loose 

glue joints, screws or any other problem that might 

affect the stability of your furniture. Tighten or 

repair as needed.

IMPORTANT NOTES:

Service Policy:

 

We will replace any part that is 

defective, missing or damaged during assembly. 

Please contact Whittier Wood Products customer 

service department directly by phone, fax, mail or 

email for a replacement part.

To Order:

 

Designate the finish, provide the furniture model 

number (upper left corner of this page), the part letter, 

production code, quantity needed, reason for replacement, 

your full name, address and telephone number.

Parts ship from our Eugene, Oregon factory within one 

or two business days from the time we receive your 

request. Please allow five to ten business days for delivery.

CALL US FIRST! 

Do not return this item to the store.

800-653-3336

 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060

www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon  97402, U.S.A.

Hours:

 

Our friendly customer service staff can be 

reached Monday-Friday 7:00 a.m. to 5:00 p.m. 

(Pacific Time). You may leave a message 24 hours 

a day, seven days a week.

  For normal household use only. 

  This assembly requires two people.

  Do not overload the drawers.

Not

 recommended 

for commercial use.

Congratulations!

This fine piece of furniture will make a gorgeous

addition to your home. For the best results, read the

Assembly Instructions before you begin your project.

AFGAC = Glazed Antique Cherry finish

AFCAF = Caffè finish

Summary of Contents for McKenzie 1306AFGAC









Reviews: