background image

Page 1

SAFETY PRECAUTIONS

• Wipe clean with a dry cloth.

CARE INSTRUCTIONS

Tools Needed:

A Phillips screwdriver.

B

 2 ea

Short Cube Side Panels

F

 8 ea

Screw Covers

E

 8 ea

Wooden Dowels

A

 2 ea

Top/Bottom Panels

PARTS:

C

 3 ea

Locking Clips

D

 8 ea

Large Phillips Screws

6739-11676-WHT

Clip & Cube

®

 Short Cube

 

 Contains small parts which could be 

a choking hazard for small children. 

Children should be under adult 

supervision at all times or serious 

injury could occur.

 Always unload and transport one unit 

at a time, then reconfigure in the new 

location (if combined into a set). 

Serious bodily injury and/or damage 

to personal belongings may occur.

 Do not hang on the wall. The product 

structure is not designed for wall 

hanging. Serious bodily injury, 

damage to personal belongings, 

and/or damage to the wall may occur.

 Do not overload. If any shelf, top, or 

bottom of bows or bends, it is 

overloaded. The shelf, top, or bottom 

could collapse and cause serious    

bodily injury and/or damage to     

personal belongings.

• 

Do not climb or step on. Unit may 

become unstable and either tip or 

collapse. Serious bodily injury         

and/or damage to personal belongings 

may occur.

 Do not mount or attach anything to the 

sides, rear or front of the unit as this can 

create a force which can cause the unit to 

tip. Serious bodily injury and/or damage 

to personal belongings may occur.

 Follow proper safety procedures when using 

power tools and ladders (when applicable).

 We recommend you protect your work 

surface during assembly to prevent 

scratching or damage to tabletops, wood 

floors, etc.

 A set of multiple units must be secured with 

at least 1 clip per 6" face, 1 clip per 12" 

vertical face, 2 clips per 12" horizontal face 

and 3 clips per 24" face when attaching these 

units together.  

• MOUNTING SET TO WALL:

 If set height 

exceeds 36 inches, use an anti-tip kit (not 

included) to avoid tipping.

WARNING

Summary of Contents for The Container Store Clip & Cube 6739-11676-WHT













Reviews: