White RE 540 Series, Repair Instructions

Page: 14 / 18

1
2
3
4 5
6
Figure 4: Figure 4
RE 540/541 Locking Hub Option Assembly
USES ITEMS 41-44
Place locking hub spline assembly (44) into wheel flange (16) while rotating wheel flange (16) slightly to allow
splines to mate.
a) Install wire ring (43).
b) Align screw holes of locking hub (42) with screw holes in locking hub spline assembly (44) and gently press
together
c) Install six screws (41) into locking hub (42) and torque to 3.3 ± 0.2 Nm [29 ± 2 in. lb.].