background image

Upright Vacuum Cleaner

Owner’s Guide

4870 Series

IMPORTANT

Do not return this

product to the store.

For assembly problems or
questions contact:
 Eureka’s
Customer Service Division toll
free at 1-800-282-2886*, 8 a.m.
to 7:30 p.m., (CST), Monday -
Friday and 10 a.m. - 6:30 p.m.
(CST) Saturday.
For replacement of broken
or missing items
 to be
shipped direct to you, call
1-800-438-7352*, 8 a.m. to
 4:45 p.m., Central Standard
Time, Monday through Friday.

*En Mexico llame al 5670-6169

www.eureka.com

Household Type

Index

Important Safeguards ............ 2
Service Information ............... 4
Assembly ............................ 5-6
Use ..................................... 7-8
Thermal Cut Off ............... 4 & 8
Accessories ........................... 9
Clear Tubes .................... 10-11
Brush Roll ............................ 12
Brush Roll Belt ................ 12-13
Dust Bag ........................ 13-14
Filters ............................. 14-15
HEPA Filter .......................... 15
Light Bulb ............................ 15
Problem Solving .................. 16
Customer Order Form ......... 17
Warranty .............................. 19

Fill in and Retain:

We suggest you record the model, type and serial numbers below, they are located on the silver rating plate on your cleaner,
and attach the receipt to the owner’ guide as proof of purchase.  For prompt and complete service information, always refer to
these numbers when inquiring about service.

Model & Type__________________________________

Serial No. _____________________________________

Summary of Contents for 4870GZ - Eureka "The Boss" SmartVac Vacuum





















Reviews: