White Wing WhiteWing II, Instruction Manual

Page: 6 / 9

09 10
ATTACHMENT COUPLINgS
If the attachment connections dry up after intensive use, put a small amount of
lubricant (Vaseline) around the O-rings on the male attachment.
TECHNICAL DESCRIPTION
120V Power 1400W
Cold water tank capacity 1.2L, 1.2 quarts, 5 cups
Working pressure 3.5Bar or 51 PSI
REPLACEMENT & OPTIONS
WW2A30N
WW2A30B
WW2A30SS
WW2A30H
WW2ACLOTH2
WW2ATRIBRUSH
WW2ASCRAPER
WW2A EXTNOZZLE
WW2AWALL
WW2ABOTTLE
Other accessories are available by contacting www.allergybuyersclub.com.
TROUBLESHOOTINg
Do not operate the steam cleaner with a damaged cord, plug or if the steam
cleaner has been dropped or damaged. To avoid risk of electric shock, do
not disassemble or attempt to repair the unit on your own. Return the unit to
WhiteWing
™
II (see warranty) for examination, repair or replacement.
PROBLEM
No steam is released through
the steam fittings.
Drops of water leak from the
attachments.
Dirty water is coming out.
Not enough steam pressure.
REMEDy
1. Turn steam unit onto the
2nd position.
2. Put required amount of
water into tank.
3. Plug unit into outlet.
4. Wait for light (5) to turn on.
5. Remove and reconnect the
hose (you will hear a 'click'
sound when it is securely
fastened).
1. Wait for light (5) to turn on.
2. Let water run through sys-
tem until steam comes out.
1. Follow cleaning instructions
in book.
1. Turn the dial until the de-
sired pressure is reached.
POSSIBLE CAUSES
1. Steam unit is not turned on.
2. Water tank is empty.
3. Unit is not plugged in.
4. Generator is not fully
heated.
5. Hose not connected properly
1. Unit is not fully heated.
2. Condensation was created
from non-use.
1. Scale may have built up.
1. The dial on the handle may
be set too low.