White Wing WhiteWing II, Instruction Manual

Page: 4 / 9

06 05
HOW TO USE yOUR STEAM CLEANER
1. Remove the water tank cap (2), and fill the tank (2) up to a maximum of
1.2 quarts of water (1.2 quarts, 1.2L or 5 cups). Securely replace the cap
until snug.
2. Connect the electrical cord (12) to the main power outlet.
3. Connect the flexible tube (13) to the appropriate accessory that you wish to use.
4. Turn the main switch (11) on. The ready light will come on when the unit
reaches operating pressure. Approximately 10 minutes.
5. Condensation may build up in the hose when steam activation is paused. To
release condensation before steaming, simply press the steam output switch
(14) and direct the condensation that is emitted away from the surface to
be cleaned.
6. During use, the orange steam ready light (5) will alternatively turn on and off.
This is normal, and indicates that steam is being generated in the boiler.
7. Before storage you must release the steam. First turn off the power (11)
switch. To release the steam simply depress the steam trigger on the steam
output switch (14). Unplug the machine. Store.
8. It is safe to leave water in the pressure tank when the steam cleaner is not
in use. If it is for an extended period of time (months) then it is best to flush
out the remaining water. To do so, follow the water removal instructions
as outlined in the maintenance of the boiler section.
WARNINg: Never unscrew the water tank cap (2) while the machine is in use.
Make sure that steam is not under pressure before opening the water cap. Before
refilling the machine WAIT for it to cool down.
THIS MODEL IS PROVIDED WITH THE
FOLLOWINg FEATURES
RED CONTROL LIgHT (9)
A red warning light signals that the water needs to be refilled. If you wish to continue
steam cleaning, see the “filling your tank” instructions.
STEAM REgULATION (ON FRONT OF UNIT)
With the steam volume control, it is possible to select the steam quantity that you
wish during your cleaning from minimum to maximum.
PRESSURE gAUgE (10)
The pressure gauge indicates the operating pressure of the steam cleaner. If the
needle is in the green section, the product is operating normally. If the needle
is continuously in the red section, the steam cleaner may require service. Please
contact the place of purchase for service.
USINg THE ACCESSORIES
CONNECTINg THE ACCESSORIES
Insert the plug at the opposite end of the steam gun/hose (13) to the connect-
ing outlet (7) all the way, making sure it cannot be pushed in further. Connect the
handle of the steam gun (14) to the extension tubes (15), pressing the locking
button lightly until the button snaps in. All the accessories are connected
the same way.
The angle adapter (24) is used for the squeegee (21) and triangular (17) brush
in the following way: hold the brush in one hand with the bristles pointing down while
with the other hand inserts the angle adapter into the brush pointing it downward.