White Knight B96M8W, Service Manual

Page: 5 / 21

Check loose connections or damage to loom Re-assemble or replace the loom
3.3 The heating system does not work
YES
Check if the “cool” program is in operation Re-test the appliance in a heating program
NO
YES
Check if terminal P4 is loose Re-attach terminals
NO
YES
Check if the loom is damaged Replace the loom harness
NO
YES
Check if the Inlet thermostat on the heater Replace the heater subassembly
assembly is damaged
3.4 The drum turns but the appliance fails to dry
Is the ambient temperature higher than 35°C
NO
YES
Check the correct program has been selected Select the correct program
NO
YES
Check if the dryer is overloaded The load placed in the drum must not exceed the
maximum load rating stated in the instruction book
NO
YES
Check that the filter is clean Clean the filter
NO
YES
Is the heat exchanger blocked Clean the heat exchanger
NO
YES
Is the Inlet thermostat damaged or has the thermal Reset the thermal cut-out if tripped. Replace the heater
cut-out tripped subassembly if damaged
NO
YES
Is the heater damaged Replace the heater subassembly
NO
YES
Check the load moisture sensors Clean and then check. If still faulty, replace.