185
20 W Stereo Integrated Audio Amplifier
10.2 Notes
5. Data relating to operation with a choke-input filter from JJ Electronic data sheet, Cadca, Slovak Republic.
Table 10.6
Key Parameters of the 6CA4
General Characteristics
Heater
6.3 V, 1 A
Peak inverse plate voltage
1000 V
Peak plate current (per plate)
500 mA
Peak heater-cathode voltage
500 V
Maximum capacitance for capacitor input to filter
50
μ
F
Minimum inductance for choke input to filter
1 H
Typical Operation with Capacitor Input to Filter
AC plate-to-plate supply voltage
700 V rms
Filter-input capacitor
50
μ
F
Total effective plate supply impedance per plate
240
Ω
Average output current
150 mA
DC output voltage at input to filter (approx.) at 150 mA load current
347 V
Typical Operation with Choke Input to Filter
AC plate-to-plate supply voltage
750 V rms
Filter-input choke
10 H
Average output current
180 mA
DC output voltage
330 V
Summary of Contents for JC Whitaker 20 W Stereo Integrated Audio Amplifier
