Ka Max Mode
Ka Max Mode provides enhanced Ka sensitivity - increased
detection. This mode can be selected with or without RSID.
See Option Select Mode for changing Ka options.
Ka Narrow Plus Mode
Many countries do not share the same Ka radar guns as the
USA. Having a radar detector that scans the complete Ka
band may not be necessary if your Country is only using one
or more of the following (34.0, 34.3, or 35.5 GHz). Other
brands of detectors may also offer a Ka narrow mode Option
of 34.3 but only Whistler includes 34.0 and 35.5 with the
Narrow Plus feature. See Option Select Mode to engage Ka
Narrow Plus mode.
Radar Signature ID (RSID) with Voice Prompts
Identify the difference between the likelihood of a Ka threat vs.
the likelihood of a Ka false from another source (possible radar
detector).
The Ka RSID feature will educate you to the common Ka speed
radar guns by displaying and announcing the nominal police
radar frequencies of 33.8GHz / 34.0GHz / 34.3GHz / 34.7GHz /
35.5GHz. The Ka alerts that do not fall into the common Ka
speed radar windows will be reported only as Ka.
Note:
This product is not a frequency counter. The unit will
categorize the received Ka signal and select the appropriate
information. Treat every Ka alert with caution.
OPERATION
17
OPERATION
16
X/K Filter Modes
Recently, many new products operate on X or K band
causing nuisance alerts to radar detectors. Some of these
are radar based Traffic Monitoring Systems mounted to
poles alongside the highway and others are K Band Lane
Change Assistants and Blind Spot Detectors found on
some automobiles. The X/K Filter Mode offers multiple
levels of rejection to reduce false alerts caused by these
systems.
Ka Filter Modes
There are times when a radar detector in another vehicle,
can emit a frequency which can cause your detector to
falsely alert. The Ka Filter Modes allow you to select the
level needed for your area to minimize the occurrences of
these false alerts.
Filter Mode is the factory default setting and should
provide adequate filtering for most conditions. If you
experience excessive alerts due to radar detectors in other
vehicles, increase the Filter level. See Option Selection
Mode to change the filter settings.
Setting Saver
Setting Saver saves your personalized settings so that when the
detector is turned off and then on again, you do not have to
re-enter them.
