background image

1: Volume Controls

Provides separate left/right 
volume control. When used in 
conjunction with the 
Stereo/Mono switch, you can 
achieve a “mix” between 
channels.

2: Headphone Outputs

Two outputs are provided for 
each of the two sections on the 
Satellite module. Each set is 
wired in parallel.

3: Stereo/Mono Switches

One switch is supplied for each 
section of the SAT-1

4: IN

Input to Satellite Module. 
Standard XLR jack is provided 
so that hookup can be 
accomplished with standard 
microphone cables.

5: THRU

Wired parallel to the input jack, 
can be used for “Daisy 
Chaining” modules.

Optional Equipment: 

PCHLIP for mounting SAT-1 on a 

microphone stand. Available at authorized Whirlwind dealers.

When using headphone impedances of 50 ohms or less, do 
not power the SAT-1 with an amplifier rated greater than 45 
watts. Failure to observe this will burn out the current limiting 
resistors inside the unit and void the warranty.

!

L

R

STEREO

MONO

1

2

PHONES

PHONES

SAT-1

SATELLITE

MODULE

IN

THRU

1

2

3

4

5

99 Ling Rd

Rochester, NY 14612

585 663-8820 Fax 585 865-8930

SAT-1

Satellite Module and

Headphone Breakout Box

XLR PINOUT

Pin 1 = shield
Pin 2 = ring (right)
Pin 3 = tip (left)

Reviews: