5
5
FIRST TIME USE
SALT, RINSE AID AND DETERGENT
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the reta-
ining elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and
on the machine’s functional components.
• It is important that the salt reservoir be never empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher
(see
PRODUCT DESCRIPTION)
and should be filled when the SALT REFILL
indicator light in the control panel is lit .
1. Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
servoir with water.
3. Position the funnel
reservoir right up to its edge (approximately
1 kg); it is not unusual for a little water to leak
out.
4. Remove the funnel and wipe any salt residue
away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash program (this could damage
the water softener beyond repair).
Whenever you need to add salt, we recommend carrying out
the procedure before the washing cycle is started.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential
that the water hardness setting is based on the actual water
hardness in your house. This information can be obtained from
your local water supplier.
The factory setting is for average (3) water hardness.
• Switch on the appliance by pressing the ON/OFF button.
•
.
n
o
t
t
u
b
F
F
O
/
N
O
e
h
t
g
n
i
s
s
e
r
p
y
b
e
c
n
a
il
p
p
a
e
h
t
ff
o
h
c
ti
w
S
• Hold down button START/Pause for 5 seconds, until you hear a
beep.
• Switch on the appliance by pressing the ON/OFF button.
• The program indicator light of the current set level fl
.
s
e
h
s
a
• Press button P to select the desired hardness level (
see
WATER HARDNESS TABLE
).
•
.
n
o
t
t
u
b
F
F
O
/
N
O
e
h
t
g
n
i
s
s
e
r
p
y
b
e
c
n
a
il
p
p
a
e
h
t
ff
o
h
c
ti
w
S
Setting is complete!
As soon as this procedure is complete, run a program without loading.
Only use salt that has been specifi cally designed for dishwashers.
After the salt has been poured into the machine, the SALT REFILL
indicator light switches off.
If the salt container is not filled, the water softener and the
heating element may be damaged as a result.
Water Hardness Table
Level
°dH
°fH
1
Soft
0 - 6
0 - 10
2
Medium
7 - 11
11 - 20
3
Average
12 - 17
21 - 30
4
Hard
17 - 34
31 - 60
5
Very hard
35 - 50
61 - 90
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A should
e
h
t
n
e
h
w
d
e
ll
if
e
b
RINSE AID REFILL indicator light in the control
panel is lit.
1. Open the dispenser B by pressing and pulling up the tab on the lid.
2. Pour in the rinse aid (max.110 ml), making sure it does not overflow
from the dispenser. If this happens, clean the spill immediately with
a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the appliance tub.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfi ed with the drying results, you can ad-
just the quantity of rinse aid used.
• Switch the dishwasher on using the ON/OFF button.
•
.
n
o
t
t
u
b
F
F
O
/
N
O
e
h
t
g
n
i
s
u
f
f
o
t
i
h
c
ti
w
S
• Press button START/Pause three times - a beep will be heard.
• Switch it on using the ON/OFF button.
• The program indicator light of the current set level fl
.
s
e
h
s
a
• Press button P to select the level of rinse aid quantity to be supplied.
•
.
n
o
t
t
u
b
F
F
O
/
N
O
e
h
t
g
n
i
s
u
f
f
o
t
i
h
c
ti
w
S
Setting is complete!
If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied.
The LOW RINSE AID indicator light will not be lit if you run out of rinse
aid. A maximum of 4 levels can be set according to the dishwasher
model. The factory setting is specific to the model, please follow
instruction above to check this for your machine.
• If you see bluish streaks on the dishes, set a low number (2-3).
• If there are drops of water or limescale marks on the dishes, set a
mid-range number (4-5).
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device A.
Introduce the detergent into the dry dispenser B only. Place the
amount of detergent for pre-washing directly inside the tub.
1. When measuring out the detergent
refer to the mentioned earlier infor-
mation to add the proper quantity.
Inside the dispenser B there are
indications to help the detergent
dosing.
2. Remove detergent residues from
the edges of the dispenser and clo-
se the cover until it clicks.
3. Close the lid of the detergent
dispenser by pulling it up until the
closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the program.
If all-in-one detergents are used, we recommend using the TABLET
button, because it adjusts the program so that the best washing and
drying results are always achieved.
A
B
A
B
Summary of Contents for WSFE2B19UK
Page 1: ...使用說明書 Model WSFE2B19UK 產品型號 WSFE2B19UK User Manual ...
Page 2: ...2 繁體中文 3 16 ...
Page 15: ...15 a b a c 4 5 6 7 15 001 ...
Page 28: ...28 a b a c 4 5 6 7 15 001 ...
