Whirlpool WRB322DMBW00 User Instructions Download Page 2

2

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

REFRIGERATOR SAFETY

State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other 
reproductive harm.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions: 

SAVE THESE INSTRUCTIONS

 

Plug into a grounded (earthed) outlet.

 

Do not remove ground prong.

 

Do not use an adapter.

 

Do not use an extension cord.

 

Disconnect power before servicing.

 

 

Replace all parts and panels before operating.

 

Remove doors from your old refrigerator.

 

Use nonflammable cleaner.

 

Do not store or use petrol, flammable liquids or gas in the

   vicinity of this or other electrical appliances. The fumes can
   cause fires or explosions.

 

Do not store explosive substances such as aerosol cans

   with a flammable propellant in this refrigerator.

 

Do not use or place electrical devices inside the refrigerator

   compartments if they are not of the type expressly
   authorized by the manufacture.

 

Use two or more people to move and install refrigerator.

 

Disconnect power before installing ice maker (on ice maker 

kit ready models only).

 

A qualified service technician must install the water line and

   ice maker. See installation instruction supplied with
   ice maker kit IC13B for complete details.

 

Connect to a potable water supply only.

 

Use a sturdy glass when dispensing ice (on some models).

 

This appliance is not intended for use by persons (including

   children) with reduced physical, sensory or mental
   capabilities, or lack of experience and knowledge, unless 
   they have been given supervision or instruction concerning
   use of the appliance by a person responsible for their safety.

 

Children should be supervised to ensure that they do not 

   play with the appliance.

 

To avoid the risk of children becoming trapped and 

   suffocating, do not allow them to play or hide inside the
   refrigerator.

 

If the power supply cord is damaged, it must be replaced by

   the manufacturer or its service agent or a similarly qualified
   person.

Summary of Contents for WRB322DMBW00
























Reviews: