4
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
CARE LABELS
The dots indicate the temperature degree for drying the laundry.
Normal temperature
Reduced temperature
Do not tumble dry
EMPTY ALL POCKETS
Objects like coins or keys can damage your laundry as well as the
drum.
ADAPTING THE DRYER TO WATER CONDUCTIVITY
The drying results are affected by the conductivity of the water used
during washing. If, by modifying the available dryness levels (iron
dry; cupboard dry; extra dry), you are not satisfied with the final
drying results, you can adapt the water conductivity level. The dryer
comes with preset level 2. Choose between level 1 (most damp
results) and 5 (most dry results).
Press and hold the
Programme button
until the
Conductivity
Adjustment symbol
on the display blinks.
Turn the knob to adjust the level (1 –2 – 3 – 4 - 5).
Press the knob to confirm the selected level.
This operation is not needed for every drying cycle. Once the most
satisfying water conductivity level has been identified, you no
longer need to modify it.
Always dry a full load; this optimizes the relative energy
consumption. The maximum load sizes for the various programmes
are indicated in the programme chart.
To reduce the drying time, make sure that the laundry is spun with
the maximum possible spin speed of the wash programme. This
reduces the moisture content in the laundry.
HINTS AND TIPS
SAVING TIPS
Programme
Load
(Kg)
Spin Speed
(rpm)
Humidity
(%)
Energy consumption
(kWh)
Drying Time (min)
ECO COTTON *
8
4
1000
1000
60
60
4.74
2.54
135
80
ECO COTTON
8
8
800
1400
70
50
5.52
3.96
154
117
COTTON IRON DRY
8
8
8
800
1000
1400
70
60
50
4.38
3.92
3.46
131
112
99
SYNTHETICS
CUPBOARD DRY
3.5
1000
40
1.44
46
CONSUMPTION DATA
Data can differ in your home, mainly depending on the moisture
content of the laundry load.
*Reference programmes for Energy Label / Regulation 392/2012 / EU
Values are based on the default programme setting, with clean door
and bottom filter. For consumer tests, the door filter and bottom
filter need to be cleaned after each cycle.
The energy consumption and drying time may differ from the values
above. They depend on the operation conditions in your home
(such as voltage fluctuation, mixture of textiles, humidity of the
textiles after spinning, load volume).
The values are determined according to European Norm 61121 and
refer to the default programme setting; changing the setting also
impacts the consumption data.
