15
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage,
or moving:
1.
Refer to “Installation Instructions” to locate, level, and
connect washer.
2.
Before using again, run washer through the following
recommended procedure:
To use washer again:
1.
Flush water pipes and hose. Reconnect water inlet
hose. Turn on water faucet.
2.
Plug in washer or reconnect power.
3.
Run washer through Heavy Duty cycle to clean washer
and remove antifreeze, if used. Use only HE detergent.
Use half the manufacturer’s recommended amount for
a medium-size load.
CLEANING THE DRAIN PUMP FILTER/
DRAINING RESIDUAL WATER
1.
Push the tabs located on both sides of the base panel
to release it, then remove.
2.
Place a broad, flat container beneath the drain pump filter
to collect the drain water.
