EN - 57
Repositioning the door
• It is not possible to change the opening direction of your fridge door, if the door handles on your
fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge can be changed, you should contact the nearest
Authorised Service to have the opening direction changed.
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a
problem occurs in the appliance. Warning codes are displayed in the Freezer and Cooler Indicators.
ERROR TYPE
MEANING
WHY
WHAT TO DO
SR
“Failure Warning”
There is/are some
part(s) Out of order
or there is a failure
in cooling process
Call Service for assistance as
soon as possible.
SR – Set value
blink on freezer set
value screen
Freezer comp.
Not Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods that
are thaw and use in short time
period.
2. Set the freezer temperature
to colder values or set the
super freeze , until the
compartment gets to normal
temperature.
3. Do not put fresh food until
this failure is off.
SR – Set value
Blink on cooler set
value screen
“Refrigerator comp.
Not Cold enough”
Ideal temperature for
Ref. Compartment
is +4 oC. If you see
this warning your
foods have risk of
spoiling.
1. Set the refrigerator
temperature to colder values or
set the super cooling mode until
the compartment gets to normal
temperature.
2. Do not open the door much
until this failure is off.
SR – Set value
blink on freezer
and cooler set
value screen
“not cold enough
Warning”
It is combination of
“not cool enough”
error for both of the
compartments.
You will see this failure when
first starting the appliance. It will
be off after the compartments
gets normal temperature
SR – Set value
blink on cooler set
value screen
Refrigerator comp.
too Cold
The foods starts to
freeze because of
the too much cold
temperature
1. Check if the “Super cooling
mode” is on
2. Decrease the refrigerator
temperature values
“--”
“Low voltage
Warning”
When the power
supply gets lower
than 170 V the
appliance gets to
steady position.
This is not a failure. This
prevents any damages on
the compressor. This warning
will off after the voltage gets
required level
BEFORE CALLING YOUR AFTER SALES
SERVICE
