COMPONENT ACCESS (Cont.)
4-12
n
Whirlpool
®
and KitchenAid
®
Filtration and Maytag
®
24" Microfiltration Dishwashers
Removing the Third Level Rack
(available on some models)
1.
Open the dishwasher door.
2.
To access track stops, pull the rack forward until it stops and
clicks into place.
3.
To open track stops, flip the track stop to the outside of the
track.
4.
After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
5.
Close track stops.
6.
Slide rack tracks back into dishwasher.
Removing the Rack Rails
1.
Turn white plastic rail retainers counterclockwise to remove
third level rack rails.
2.
Use a 5/16" nut driver to remove the four bolts holding the
upper rack rail.
Remove Wash Tube Cover
1.
Complete the steps 1-6 from
"Removing the Third Level
Rack"
section.
2.
Pry two tabs outward and push to disengage Wash Tube
Cover from Manifold Drive Box.
3.
Spread the two tabs to remove Manifold Drive Box from rails.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
