Whirlpool LBR5432JQ0 Use And Care Manual Download Page 7

7

6. Set the TEMPERATURE selector to the correct setting for the 

type of fabric and soils being washed. Use the warmest water 
safe for fabric. Follow garment label instructions.

NOTE: In wash water temperatures colder than 70ºF 
(21ºC), detergents do not dissolve well. Soils can be difficult 
to remove. Some fabrics can retain wear wrinkles and have 
increased pilling (the formation of small lint-like balls on the 
surface of garments).

7. (OPTIONAL STEP) Some models have an EXTRA RINSE 

selector. For an additional rinse and spin at the end of a wash 
cycle, set the EXTRA RINSE selector to ON. On some 
models, the Extra Rinse feature is part of the cycle. 

8. (OPTIONAL STEP) Some models have a CYCLE SIGNAL 

selector. Set the CYCLE SIGNAL selector to ON if you want 
your washer to alert you when the wash cycle is complete. 
The signal is helpful when you are washing items that should 
be removed from the washer as soon as the cycle ends.

9. Push in the Cycle Control knob and turn it clockwise to the 

wash cycle you want. Reduce the wash time when using a 
small load size setting. See “Selecting a Cycle and Time.”

Pull out the Cycle Control knob to start the washer.

To stop or restart your washer

To stop the washer at any time, push in the Cycle Control 
knob. 

To restart the washer, close the lid (if open) and pull out 
the Cycle Control knob.

Adding bleach to  models without a bleach dispenser 

If desired, add measured liquid chlorine bleach after the washer 
starts agitating. Pour diluted bleach around the agitator, not 
directly on the load. Undiluted bleach will damage any fabric it 
touches. (See "Adding Liquid Chlorine Bleach.")

Adding softener to models without a fabric softener 
dispenser 

If desired, add measured liquid fabric softener to the final rinse 
water. Always dilute fabric softener with ½ to 1 cup of warm 
water. Undiluted fabric softener can stain fabrics. (See "Adding 
Liquid Fabric Softener.")

Selecting a Cycle and Time

This section describes the available wash cycles and will help 
you make the best cycle selections for your wash loads. Each 
cycle is designed for different types of fabric and soil levels. 

The washer pauses briefly throughout each cycle. These 
pauses are normal. Refer to “Normal Washer Sounds” to 
learn more about the sounds you may hear during a wash 
cycle.

Refer to “Understanding Washer Cycles” to learn what 
happens during a wash cycle.

NOTE: This manual covers several different washer models. The 
washer you have purchased will not have all of the cycles 
described.

Heavy cycle

This cycle features high-speed agitation followed by brief periods 
of low-speed agitation for cleaning sturdy fabrics and heavily 
soiled loads that need maximum soil removal. Select Super Wash 
or Regular depending on whether your load is moderately or 
heavily soiled. For improved cleaning, use twice the amount of 
detergent recommended for a wash cycle. The Heavy cycle 
features Extra Rinse as part of the cycle.

Normal cycle

This cycle features high-speed agitation followed by a brief 
period of low-speed agitation for cleaning cottons and linens. 
High spin speeds shorten drying time. Select 6 to 15 minutes of 
wash time, depending on your model, for loads that are 
moderately or heavily soiled. For lightly soiled loads, use the 
shortest time setting.

Super Wash - Select the Super Wash setting to wash heavily 
soiled loads that need maximum soil removal. Use twice the 
amount of detergent recommended for a wash cycle.

Casual/Permanent Press cycle

This cycle starts with high-speed agitation and then steps down 
to low-speed agitation for cleaning permanent press blends and 
synthetic fabrics. To minimize wrinkling, this cycle features a 
cool-down rinse and a low-speed final spin. Select 6 to 10 
minutes of wash time, depending on your model, to clean lightly 
to moderately soiled loads.

Delicates cycle

This cycle features low-speed agitation for gentle soil removal 
from delicate items and washable knits. Low spin speeds 
minimize wrinkling. Select 3 to 9 minutes of wash time, 
depending on your model, to clean lightly to moderately soiled 
loads.

Hand Washables cycle

This cycle features a series of brief, low-speed agitations and 
short soaks to gently clean special-care items. Low spin speeds 
minimize wrinkling. Wash small loads. If items appear to be 
floating (due to trapped air), stop the washer by pushing in the 
Cycle Control knob. Push items down into the washer. Restart 
the washer.

Water Temp

Use For

Hot
111°F (44°C)
or above

Whites and pastels

Heavy and greasy soils

Warm
90°-110°F
(32°-43°C)

Bright colors

Moderate to light soils

Cold
70°-90°F 
(21°-32°C)

Colors that bleed or fade

Light soils

Summary of Contents for LBR5432JQ0













Reviews: