COMPONENT ACCESS
3-2
n
Vesta Gas and Electric Slide-In Ranges
Removing the Control Panel
1. Remove all control knobs.
2. Open oven door and remove 3 screws from the
bo om of the control panel assembly.
. Snap out the plastic lower control panel cover.
Figure 1
4. Remove 2 screws from the control panel mounting
bracket (1 on each side).
5. Disconnect the ribbon connector.
. Disconnect the multi-wire harness.
. Lift Control Panel out.
Figure 2
GAS RANGE
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Removing the Cooktop
1. Remove all grates, burner caps and burner bases
from the cooktop.
2. Remove 2 burner mounting screws from each of the
5 burners.
3.Open oven door and remove 3 screws from the
bo om of the control panel assembly.
4. Snap out the plastic lower control panel cover.
Figure 3
Figure 4
