1) Applicable to the bathroom without ceiling
.
2) Firstly set the support stick transverse stability to the wall, then embed the Main Body on
the support
.
3) Set the exhaust pipe (4“(100mm))to the glass window. Fix the exhaust pipe to the air
outlet joint with tape or metal clamp.
4) Applicable size of the Main body
:
300X400mm
Thickness of the Main Body
：
164mm
5) The minimum distance between the surrounding structures should be 50 cm.
【
Installation Method
】
D
.
Wall mount type method
【
Installation of the Remote Control
】
1
2
3
1) Fix the remote control frame to the designated place and make marks
according to the arrows.
Dig holes 1/4(6 mm) according to the mark, and fill the holes with four plastic plugs
.
3 Put the remote control into the frame
.
2)
)
This is the wireless remote control, please install this to the suitable place if necessary
.
3
2
1
-
08
-
