【
Installation Method
】
1
)
he Main Body
：
Install t
2) Install the Exhaust Pipe
B.Ceiling Type Method
Plastics
Aluminum pipe
Nominal 4
"
(
inner diameter
＞
100mm
)
Tape or fillings
Downdip 1-2
1
2
3
4
5
1.Screw
2.Nut
3.Washer
4The machine fixed hole
5.Hooded Nut
4)
The minimum distance between the surrounding structures should be 50 cm.
Open the 4 screw covers, and use four screws to fix the Front Panel and the Main Body.
After having done the above , please confirm the following inspection points
.
■
-
06
-
■
Whether the installation of the Front Panel is well fixed
.
■
Whether the noise or shaken happen during operation.
■
Use tape or the filling to seal the junction between the exhaust pipe and the air outlet joint.
■
The exhaust pipe should have the tendency(1 degree to 2 degrees) down towards outside
.
■
Fix the Main Body to the Boom ( Recommend Boom M6 if necessary).
3) Install the Front Panel
