background image

GB -1-

Chart

PROGRAM 
SELECTION 
BUTTONS
Push button 
of required 
program and 
indicator of 
this program 
lights up (see 
“Table of 
programs” - 
next page).

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.

FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.

MULTI-
ZONE
Allows you to 
choose the washing 
zones. Press this button 
(repeatedly) to select the 
wash zones:

both racks

only lower 
rack

only upper 
rack (including 
cutlery rack)

- indicator lits

DELAYED 
START
Push the 
button 
(repeatedly) to 
delay the start of 
the program. 
Adjustable from 1 
to 24 hours. With 
each press of the 
button, the 
delayed start 
indicator increases 
by one hour and 
after 24 restarts 
from 0. Then press 
the Start button. 
The dishwasher 
will start after the 
set time.

START/
RESUME 
BUTTON
Push this button to 
start the selected 
program: the indicator 
lights up and goes off at 
the end of the 
program. When the 
door is opened during 
a washing cycle, the 
cycle is temporarily 
paused: the Start 
indicator blinks. To 
resume the cycle close 
the door and push 
Start button again.

CANCEL/OFF 
BUTTON
Push this button 
to switch off the 
control panel.
If pressed when a 
program is running it 
cancels the program 
ongoing draining water 
for 1 minute (0:01 is 
shown into the display).
If pressed when the 
dishwasher is switched 
off, it drains any 
possible liquids from 
dishwasher (1 minute 
process).

RINSE AID INDICATOR

When lit (at the end of the 
cycle), the rinse aid dispenser 
needs to be refilled.

POWER 
CLEAN 
MAX
Thanks to the 
additional power jets 
this option provides a 
more intensive and 
powerful wash in the 
lower rack, in the 
specific area. This 
option is 
recommended for 
washing pots and 
casseroles (see page 
7). Press this button 
to activate Power 
Clean (the indicator 
lights up).

TABLET 
SETTING
Press to 
select(the 
indicator lights up) 
or deselect 
tablets. If not 
selected then 
powder is a 
default detergent.

SALT INDICATOR

When lit (at the end of the 
cycle), the salt reservoir needs 
to be refilled.

WASH TIME DISPLAY

Indicated the cycle duration and the remaining time (h:min). 
With “Delayed start” selected it indicates the time remaining until program start (h.00) 
- below 1h (0:mim).
If “Fx  Ey ” messages appears on the display, see page 9 - chapter “ What to do if...”.

5019 396 01991

ADP 7955 TOUCH

DELAY INDICATOR

When lit, the time 
selection and delay start 
countdown.

KEYBOARD LOCK

INDICATOR
When lit, it indicates that 
keyboard lock is active.

ANTIBACTERIAL 
RINSE

3)

This function 
activates an antibacterial 
rinse at the end of the wash 
cycle, guaranteeing a further 
reduction of bacteria. Press 
the button to activate or 
deactivate the function. This 
function can be used with 
the programs indicated in 
the table of programs. The 
dishwasher door must be 
kept shut for the entire 
duration of the program in 
order to guarantee 
reduction of bacteria. If the 
door is opened the 
indicator lamp starts 
flashing.

KEYBOARD 
LOCK
This option 
allows you to lock the 
buttons on the 
control panel. 
Children will not be 
able to accidentally 
start the dishwasher 
by pressing the 
buttons on the 
control panel when 
this option is 
selected. If you want 
to activate this option 
hold down the 

 

button for 3 seconds. 
Repeat the same 
operation to unlock 
the panel.

Quick reference guide

Summary of Contents for ADP 7955 TOUCH













Reviews: