manualshive.com logo in svg

WHILL F, User Manual

Share
Download
WHILL F User Manual Download Page 69

68

WHILL Model F User Manual

5. 

Operating procedures

This section explains the procedures for getting in and operating the device.

 WARNING

 Do not sit on the controller, place the controller on the ground with the device folded, or apply 

an excessive load to the controller. Do not press the controller or switches with excessive force 
or operate them with a sharp object.

There is a risk that the controller may be damaged, rendering the device inoperable.

 CAUTION

 If the device is not used for a long period, ensure the battery is fully charged before storing. 

Charge the battery at least once a month.

There is a risk that the battery may get excessively depleted and cannot be charged.

•  This device is an electrical product. The waterproof performance of this device conforms to IPX4 (resistance 

against water splashes from any direction). To prevent a potential malfunction, please avoid extended use in 
rainy weather and driving through puddles.

•  When using the device for the first time, it is recommended that you use it in an environment with someone 

around you.

Summary of Contents for F

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands