WHILL C2 User Manual Download

Page: 69 / 114

WHILL Model C2/Ci2 User Manual

5.3.2.

Switching the position of the control pad

The control pad can be installed on the right or left arm.

CAUTION

Do not sit on the control pad, place the removed seat assembly upside down, or apply an
excessive load to the control pad. Do not press the control pad or switches with excessive force
or operate them with a sharp object.

There is a risk that the control pad may be damaged, rendering the device inoperable.

Do not throw, step on, drop the control pad, or immerse it in water.

There is a risk that the control pad may be damaged from strong impact, rendering the device
inoperable.

Do not press forcefully, scratch or touch the display with dirty hands.

There is a risk that the display may become damaged or illegible.

Do not disassemble the control pad.

Doing so may cause malfunction of the control pad.

Remove the battery.

For the removal procedure, refer to “5.4.1. Removing
the battery” on page 84.

Remove the seat cushion.

Seat

cushion

Summary of Contents for C2



















































































































Search results

Summary of Contents for C2

Reviews:

Related manuals for C2

Brands by name

Popular brands

WHILL C2, User Manual

Search results

Summary of Contents for C2

Reviews:

Related manuals for C2

Brands by name

Popular brands