WHILL C2 User Manual Download Page 57 | Manualshive

Page: 57 / 114

background image

56

WHILL Model C2/Ci2 User Manual

5.

Assembly, adjustment, and disassembly

This section explains how to assemble and disassemble the device, and how to adjust each component.
Assemble the device in the order described in this user manual.

WARNING

Do not hoist the device when there is a person on the device. Always disassemble the device
before lifting it. Be careful of the weight when lifting each component. Do not lift the component
by holding the battery handle while the battery is inserted.

There is a risk of injury to the user and damage to the device.

Perform assembly, adjustment, and disassembly on a flat and level surface with the battery
removed and brakes locked.

There is a risk of accident.

Always place all parts back on after adjustment or disassembly.

There is a risk of damage to the device if there is a missing component.

Assemble the device in the order described in this user manual. Do not perform any
disassembly, adjustment, repair, or modification that is not listed in this manual.

There is a risk of injury and product safety risk due to damage to the device or its parts.
Performing repair or modification which is not listed in this manual will invalidate the warranty.

Do not perform assembly in a wet environment or if the device is wet.

There is a risk the device may become damaged and accidents may occur.

Consult with your distributor when adjusting the seat height, back support height/angle, or arm position. Only a
trained service technician is permitted to perform maintenance on the device.

5.1. Component list

This device can be disassembled into the following five components.

• Seat assembly

«
...
55
56
57
58
59
...
»

Summary of Contents for C2



















































































































Reviews:

No comments

Related manuals for C2

crazy cart shift

Brand: Razor Pages: 12

Brand: Honda Pages: 174

Brand: LOGO SILVER Pages: 20

Brand: Zero Motorcycles Pages: 142

Brand: F-Wheel Pages: 6

Brand: Askoll Pages: 288

Brand: Billow Technology Pages: 38

Brand: Hudora Pages: 8

Brand: Meyra-Ortopedia Pages: 56

Brand: CRUSSIS Pages: 2

Brand: Hover-1 Pages: 26

Brand: CareCo Pages: 23

GB-106 Buzzaround Lite

Brand: Golden Pages: 40

Brand: DAELIM Pages: 188

Brand: Zipr Pages: 13

Brand: Jetson Pages: 10

Brand: MANCO Pages: 9

Brand: Eclipse Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands