DFS360
|
User Manual
13
。
The USB cable should not be placed on DFS360 / DFS360D main
console.
Figure 8: Correct Wiring Diagram of the USB Cable
3.
Make sure the output voltage of the USB cable is between
4.75V ~ 5.25V (The minimum input voltage that DFS360 /
DFS360D can work is 4.5V).
4.
Open AP
“
WhaleTeq DFS360 Test System
” on PC
/ Laptop .
4
Getting Started
4.1
PC System Requirements
DFS360 software uses a Windows PC to connect and control DFS360
/
DFS360D
via USB module.
PC requirements:
-
Windows PC (Windows 7 or later, suggest to use the genuine
version)
-
Microsoft .NET 4.0 or higher
-
Administrator access (essential for installing software, driver, and
Microsoft .Net Framework)
-
1.5 GHz CPU or higher
-
1GB RAM or higher
1
1
Relative to normal PC processing, there is no special use of PC speed. However, there has been
noted a slow increase in system RAM usage over long periods of time up to 30-40MB (related to MS
Windows “garbage collection”).
PCs with only 512MB or less installed and are running several other
programs (in particular, Internet Explorer), may exceed the available RAM, requiring access to the
