42
AECG100 | User Manual
(13)
Max Peak:
Display the peak value of DUT LED, which is sampled by
AECG100 PD, during the selected time interval.
(14)
Time axis:
Adjust to change the unit of the time axis.
(15)
Enlarge:
Click to better view the sampling details.
(16)
Load:
It requires loading PPG raw data separately by different
“Channels”
(PPG Green/ PPG RED/ PPG Infrared). The raw data file can
be loaded by clicking the “File” section.
The raw data file is either saved
from (1) Signal tab “Waveform Raw” or self
-constructed according to
the WhaleTeq rule (click
“
Help
”
for more details). The
“S
ignal
”
number
corresponds to channel types. The
“
Total Length
”
displays the total
playback time. Users have
to manually adjust “Output Setting” to
ensure the AECG100 output signal properly.
Figure 47: Waveform Player
(17)
Play/Stop:
Play the selected raw data file in *.txt format. Once
stopped, play from the beginning.
(18)
Loop:
Check to replay the raw data file repeatedly.
(19)
Current Position:
Display the timing of the played raw data.
(20)
Waveform Display Scale:
Adjust the display scale for 2 sec, 5 sec, or
10 sec time frames.
(21)
Output Selection:
Users can select to play signals via RED LED
(waveform displayed in
Grey-green
) and Infrared LED (waveform
displayed in
Purple
), or via either one of them.
4.4
PWTT Mode
It requires to connect Green LED PPG module (PPG-1R-525) or reflective
SpO
2
module (PPG-2R-840/PPG-2R-940) or transmission SpO
2
module
