background image

 

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION.  

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

Whalen Furniture Manufacturing 

 

 

 

 Page 1                                        Factory No. 16086 

                        Date 2015-06-09 Rev. 2 Factory: KONRIC 

                                             

 

60" Rustic Brown Bow Front Media Fireplace 

Stock #

 

WMFP60EC-7 

 
 
 
 
 
 
 
 
 

 
 

 

 
                                           

 

 

 

 

 
 
 
 
 
 

 
 
 
 
 
 
 
 

                                    ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the 
store where it was purchased. Please call our customer service number and have your instructions 
and parts list ready to provide the model name, part name or factory number: 

 

1-866-942-5362 

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday 

Or visit our web site 24 hours a day, 7 days a week for product assistance at  

www.whalenstyle.com

 

Or e-mail your request to 

[email protected] 

 

 

LOT NUMBER:       

 

 

DATE PURCHASED:    /    /  

Summary of Contents for WMFP60EC-7





















Reviews: