Whalen SIG3IN1CGT Manual Download Page 1

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION.  

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

Whalen Furniture Mfg., Inc.                               Page 1 

                             Factory No. 33-10944

 

                                            
 

 

 

Signa Gaming Theater

TM

 3-in-1

TM

 TV Stand   

Model # SIG3IN1CGT 

U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending 

 

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your 
needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option. 
This will allow you to use this TV Console in different configurations at a later date, if desired.

 

 

 

  
 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

                                                                    

                          

 

 

 

 

 

ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if parts are missing, DO NOT return this 
item to the store where it was purchased. Please call our customer service number and have 
your instructions and parts list ready to provide the model name, part name or factory 
number: 

 

1-866-942-5362 

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday 

Or visit our web site 24 hours a day, 7 days a week for product assistance at  

www.whalenstyle.com

 

Or e-mail your request to 

[email protected] 

 

 
 

 

LOT NUMBER:      

 

DATE PURCHASED:   /    /  

Summary of Contents for SIG3IN1CGT
























Reviews: