Wexxar WF30T, Operation And Service Manual

Page: 58 / 190

WF30T Case Former Controls
5-45
49) ‘Dry Cycle’ Function Toggle Button
Users can also toggle the
DRY CYCLE
function
ON
or
OFF
by pressing the black
‘DRY CYCLE OFF’
button on
the bottom of the screen. This will activate the
DRY
CYCLE
function, and the button will be replaced with a
blue
‘DRY CYCLE ON’
button. Users can turn the
DRY
CYCLE
function off by pressing the
‘DRY CYCLE ON’
button, thereby restoring the
‘DRY CYCLE OFF’
button.
Press the
‘PREVIOUS’
or
‘MAIN CONTROL’
buttons to
exit either of the
‘Servo Settings’
screens.
HIGH SPEED SERVO SETTINGS
Table 9: High Speed Servo Settings
JAWS FORMING HEAD
CURRENT VALUE 15700 15700
HOMING VALUE 17500 20000
OPEN CLOSE OPEN CLOSE
INITIAL SPEED 32767 00000 20000 11900
RAMP RATE 01525 00800 00050 00020
LOW SPEED SERVO SETTINGS
Table 10: Low Speed Servo Settings
JAWS FORMING HEAD
CURRENT VALUE 15700 15700
HOMING VALUE 17500 22000
OPEN CLOSE OPEN CLOSE
INITIAL SPEED 32767 00000 20000 11800
RAMP RATE 01550 00775 00050 00050
Figure 5-64: 'DRY
CYCLE ON' Button
Figure 5-65:
'PREVIOUS' Button